Acceptance Mark
NEWS
2014-07-28
switching adapters meet C-TICK standard
Joint Standards Australia and New Zealand is "AS / NZS" is beginning its standard is basically consistent with the IEC, and contains some national differences. Australia and New Zealand due to the implementation of the mutual recognition of certification, so long as the products obtained certification of a country which can be sold in another country.

Electrical safety of conformity assessment, by the states or regions certification bodies (Regulatory Authority) in accordance with "1945 Electrical Safety Act"(Electrical Safety Act of 1945) unity and mutual approval of program management. This plan to electrical products are divided into two categories: "Control" (Prescribed) and "non-control" (Non-prescribed) two categories.

1 control products comply with the relevant safety standards, and the need to obtain a recognized certificate (Certificate of Approval) certification bodies.
2 non-regulated products certified without direct sales, but manufacturers are required to ensure that products comply with Australia and New Zealand electrical safety standard AS / NZS 3820:1998 (Essential Safety Requirements for Low Voltage Electrical Equipment); may choose to apply for certification bodies compliance certificate (Certificate of Suitability).

EMC architecture controlled by New Zealand and Australia and the European Union CE Marking EMC are substantially the same, self-proclaimed mining methods. Electromagnetic compatibility (EMC) Compliance Plan is based on the 1992 Radio Communications Act (Radio Communications ACT 1992) formulated products covers a wide range, including motor drive and heat appliances, electric tools and similar products, lighting and similar equipment television receivers and audio equipment, information technology products, industrial scientific and medical equipment, welding equipment ignited engines and so on. The program product according to the degree of risk of electromagnetic interference, the product is divided into three categories, the second and third categories of products must be accompanied by C-Tick mark. But no matter which category the product belongs, must comply with the relevant EMC standards.

Certification Body:

DoFT, DoIR, ESV, SAI

ACMA

DoFT, DoIR, ESV, SAI

Mark:

NSWXXXXX

QXXXXX

VXXXXX

SAI TEXXXXX

C-Tick Mark

RCM Mark

Nature:

Mandatory

Mandatory

Voluntary

Required standard:

Safety

EMC

Safety + EMC

Factory inspection:

Non-essential condition

Non-essential condition

Non-essential condition

CB Scheme Member :

YES

Voltage

Australia 240 Vac, 230 Vac, New Zealand

Frequency

50Hz

Plug

Australia and New Zealand specification AS / NZS 3112



Australian suppliers must first obtain the Australian Communications and Media Authority (Australian Communications and Media Authority) approval to use the C-Tick mark. If products also comply with electrical safety and EMC requirements, it may also apply for regulatory compliance Mark Mark RCM (Regulatory Compliance Mark).

Our Company's power adapters meet C-TICK standard, please contact us.